Friday, August 6, 2010

Does your Cracked Pro E gives License Error Message when Opened..?

Recently I have been trying out ProE for creating some model.  Since I had used torrent setup file, I tried really hard to install using the guidelines given by our crackers.  Somehow I installed and made it to run for me.  After 2 days, the real torture started to me.  Pro E started displaying the following message.

*****************************

Warning Message List

License request failed for feature

Requesting PROE_DDiTy…

*****************************

 ProE_License_Erro

I couldn’t find any solutions from online.  All I had is Chinese websites, blabbered with uncommon phrases.  Later, I decided it to overwrite the installed files and found that “ptc_licfile.dat” is real cause of the problem.  Since I removed it from desktop after 2 days (I used desktop for temporary purpose), Pro E searched for the file from desktop and shown this error.  When I reverted back the file, I got my pro e work good.  Can’t  believe..? Just try out by moving the file “ptc_licfile.dat” which you used to install from its directory.

Not only for DDiTy error this solution works, but also for any kind of “License request failed for feature” issue, you can try out this.  I found some other requesting failed in my industrial system which was back in good condition now with this same solution.

Posted by at

51 comments:

  1. mayank0503March 5, 2012 at 1:34 AM

    I am also having the same problem. Can you please tell me the whole process?
    I don't have much knowledge about this.

    thanks

    ReplyDelete
    Replies
    1. AnonymousApril 17, 2022 at 1:47 AM

      My Project Status: Does Your Cracked Pro E Gives License Error Message When Opened..? >>>>> Download Now

      >>>>> Download Full

      My Project Status: Does Your Cracked Pro E Gives License Error Message When Opened..? >>>>> Download LINK

      >>>>> Download Now

      My Project Status: Does Your Cracked Pro E Gives License Error Message When Opened..? >>>>> Download Full

      >>>>> Download LINK WO

      Delete
  2. pradapJuly 12, 2012 at 1:41 AM

    I am also having the same problem. Can you please tell me the whole process?
    when i finish the instl and open pro e get the warning

    i have crack
    plz help me

    ReplyDelete
    Replies
    1. UnknownJune 3, 2020 at 2:01 AM

      then please send me the ptc_licfile.dat file email me on
      dhameliyaarpitv602@gmail.com

      Delete
  3. AshokOctober 4, 2012 at 10:34 PM

    Thanks it really works ....

    ReplyDelete
  4. himanshu_smart_sporty_unconventionalDecember 30, 2012 at 1:52 AM

    Oh my GOD, it worked
    YOU are my savior dude
    thanks a lot

    ReplyDelete
  5. UnknownJanuary 27, 2013 at 10:12 AM

    hi

    i installed proe but it is giving an error.

    invalid inconsistent license file proe-ddity _8

    can u please reply me solution

    my email is engr_umair85@hotmail.com

    ReplyDelete
  6. UnknownMarch 27, 2013 at 1:24 AM

    send me crack too...... ifhamsheikh@gmail.com......i am getting same error

    ReplyDelete
  7. UnknownJune 14, 2013 at 6:59 AM

    Really thanks a lot man it really helped me a lot.....

    A heavy Salute for this HELP

    _/\_

    ReplyDelete
  8. $iddhe$hJuly 5, 2013 at 3:53 AM

    Hello... please could any one tell me the exact process to get rid off this error... kindly reply on
    siddhesh.athavale@gmail.com

    ReplyDelete
    Replies
    1. AjayvigneshApril 26, 2014 at 12:49 AM

      Hello dudes,

      It's been long since I used this Pro Engineering. As far as I remember, while installing the Pro-E, you should have chosen a PTC License file from a location (for eg. c:\some_folder\ptc_licfile.dat). After installation you should have seen that Pro E works fine. But in case you removed/edited that file ptc_licfile.dat from the location c:\some_folder\ptc_licfile.dat then the above error would come. Better solution is that, if you remember the location from where you chosen that file and deleted later, then replace that file right there in that location. Else re-install the Pro E and keep the file in the proper location (like My documents) and don't disturb that file after you got Pro E working.

      Thanks.

      Delete
  9. UnknownDecember 18, 2013 at 11:40 AM

    does it work for "licence request failed for feature proe 200/9 invalid host"

    ReplyDelete
  10. UnknownFebruary 4, 2014 at 8:01 PM

    hello
    i have the same problem can any one tell me the solution exactly ???

    ReplyDelete
    Replies
    1. AjayvigneshApril 26, 2014 at 12:48 AM

      Hello dudes,

      It's been long since I used this Pro Engineering. As far as I remember, while installing the Pro-E, you should have chosen a PTC License file from a location (for eg. c:\some_folder\ptc_licfile.dat). After installation you should have seen that Pro E works fine. But in case you removed/edited that file ptc_licfile.dat from the location c:\some_folder\ptc_licfile.dat then the above error would come. Better solution is that, if you remember the location from where you chosen that file and deleted later, then replace that file right there in that location. Else re-install the Pro E and keep the file in the proper location (like My documents) and don't disturb that file after you got Pro E working.

      Thanks.

      Delete
  11. UnknownMarch 17, 2014 at 12:37 AM

    Hi..
    i have same problem can anybody help me out for this.
    mail id: sangamesh1984@gmail.com

    ReplyDelete
    Replies
    1. AjayvigneshApril 26, 2014 at 12:48 AM

      Hello dudes,

      It's been long since I used this Pro Engineering. As far as I remember, while installing the Pro-E, you should have chosen a PTC License file from a location (for eg. c:\some_folder\ptc_licfile.dat). After installation you should have seen that Pro E works fine. But in case you removed/edited that file ptc_licfile.dat from the location c:\some_folder\ptc_licfile.dat then the above error would come. Better solution is that, if you remember the location from where you chosen that file and deleted later, then replace that file right there in that location. Else re-install the Pro E and keep the file in the proper location (like My documents) and don't disturb that file after you got Pro E working.

      Thanks.

      Delete
  12. Deepak aagriMarch 27, 2014 at 3:46 PM

    same prb help me deepak88aagri@gmail.com

    ReplyDelete
    Replies
    1. AjayvigneshApril 26, 2014 at 12:48 AM

      Hello dudes,

      It's been long since I used this Pro Engineering. As far as I remember, while installing the Pro-E, you should have chosen a PTC License file from a location (for eg. c:\some_folder\ptc_licfile.dat). After installation you should have seen that Pro E works fine. But in case you removed/edited that file ptc_licfile.dat from the location c:\some_folder\ptc_licfile.dat then the above error would come. Better solution is that, if you remember the location from where you chosen that file and deleted later, then replace that file right there in that location. Else re-install the Pro E and keep the file in the proper location (like My documents) and don't disturb that file after you got Pro E working.

      Thanks.

      Delete
  13. DineshApril 3, 2014 at 1:54 AM

    Hi
    I am facing the same issue. Can you pls help me. Dinesh.skanda11@gmail.com

    ReplyDelete
    Replies
    1. AjayvigneshApril 26, 2014 at 12:48 AM

      Hello dudes,

      It's been long since I used this Pro Engineering. As far as I remember, while installing the Pro-E, you should have chosen a PTC License file from a location (for eg. c:\some_folder\ptc_licfile.dat). After installation you should have seen that Pro E works fine. But in case you removed/edited that file ptc_licfile.dat from the location c:\some_folder\ptc_licfile.dat then the above error would come. Better solution is that, if you remember the location from where you chosen that file and deleted later, then replace that file right there in that location. Else re-install the Pro E and keep the file in the proper location (like My documents) and don't disturb that file after you got Pro E working.

      Thanks.

      Delete
  14. Anil kumarApril 5, 2014 at 10:18 PM

    Hi
    I am facing the same issue. Can you pls help me.
    kumar.anilkumar.anil24@gmail.com

    ReplyDelete
    Replies
    1. AjayvigneshApril 26, 2014 at 12:48 AM

      Hello dudes,

      It's been long since I used this Pro Engineering. As far as I remember, while installing the Pro-E, you should have chosen a PTC License file from a location (for eg. c:\some_folder\ptc_licfile.dat). After installation you should have seen that Pro E works fine. But in case you removed/edited that file ptc_licfile.dat from the location c:\some_folder\ptc_licfile.dat then the above error would come. Better solution is that, if you remember the location from where you chosen that file and deleted later, then replace that file right there in that location. Else re-install the Pro E and keep the file in the proper location (like My documents) and don't disturb that file after you got Pro E working.

      Thanks.

      Delete
  15. UnknownApril 23, 2014 at 6:25 AM

    I have same problem but i cant understand your answer would you please explain this so a person with less knowledge of computer understand easily.

    ReplyDelete
    Replies
    1. AjayvigneshApril 26, 2014 at 12:47 AM

      Hello dudes,

      It's been long since I used this Pro Engineering. As far as I remember, while installing the Pro-E, you should have chosen a PTC License file from a location (for eg. c:\some_folder\ptc_licfile.dat). After installation you should have seen that Pro E works fine. But in case you removed/edited that file ptc_licfile.dat from the location c:\some_folder\ptc_licfile.dat then the above error would come. Better solution is that, if you remember the location from where you chosen that file and deleted later, then replace that file right there in that location. Else re-install the Pro E and keep the file in the proper location (like My documents) and don't disturb that file after you got Pro E working.

      Thanks.

      Delete
    2. UnknownAugust 5, 2016 at 9:09 AM

      Hi Ajay.

      After keeping the file in save directing having invalid file or format error.

      Delete
  16. UnknownApril 23, 2014 at 6:27 AM

    kashifahmad1222@gmail.com

    ReplyDelete
    Replies
    1. AjayvigneshApril 26, 2014 at 12:47 AM

      Hello dudes,

      It's been long since I used this Pro Engineering. As far as I remember, while installing the Pro-E, you should have chosen a PTC License file from a location (for eg. c:\some_folder\ptc_licfile.dat). After installation you should have seen that Pro E works fine. But in case you removed/edited that file ptc_licfile.dat from the location c:\some_folder\ptc_licfile.dat then the above error would come. Better solution is that, if you remember the location from where you chosen that file and deleted later, then replace that file right there in that location. Else re-install the Pro E and keep the file in the proper location (like My documents) and don't disturb that file after you got Pro E working.

      Thanks.

      Delete
  17. parasuApril 24, 2014 at 1:41 PM

    SAME PROBLEM PLS ANY ONE SEND ME THE CRACK
    PLLLLSSSSSS
    parasuraghavan@gmail.com

    ReplyDelete
    Replies
    1. AjayvigneshApril 26, 2014 at 12:47 AM

      Hello dudes,

      It's been long since I used this Pro Engineering. As far as I remember, while installing the Pro-E, you should have chosen a PTC License file from a location (for eg. c:\some_folder\ptc_licfile.dat). After installation you should have seen that Pro E works fine. But in case you removed/edited that file ptc_licfile.dat from the location c:\some_folder\ptc_licfile.dat then the above error would come. Better solution is that, if you remember the location from where you chosen that file and deleted later, then replace that file right there in that location. Else re-install the Pro E and keep the file in the proper location (like My documents) and don't disturb that file after you got Pro E working.

      Thanks.

      Delete
  18. UnknownJune 22, 2014 at 1:05 AM

    i have same problem what can i do

    ReplyDelete
  19. UnknownOctober 19, 2014 at 1:43 AM

    Kindly send it to me . I am also facing same issues. rakrish90@gmail.com

    ReplyDelete
  20. UnknownJanuary 17, 2015 at 7:11 PM

    for these problems kindly contact me @
    kannanbharathi2017@gmail.com
    i will clearly explain u all process needed for the installation of creo 2.0 in 32 & 64 bits.

    ReplyDelete
  21. UnknownFebruary 12, 2015 at 8:03 PM

    I'm facing the same error please mail the process on lucky.saeindia@gmail.com

    ReplyDelete
  22. UnknownAugust 25, 2015 at 11:34 AM

    I'm facing the same error please mail the process on hzaliasghar@gmail.com

    ReplyDelete
  23. UnknownSeptember 8, 2015 at 1:05 AM

    am facing this prob firs time in 2 years. i know the file location of lic.dot file but dont understand what to do next .plz help me to get off this prob.

    ReplyDelete
  24. UnknownSeptember 8, 2015 at 1:20 AM

    am facing this prob firs time in 2 years. i know the file location of lic.dot file but dont understand what to do next .plz help me to get off this prob.

    ReplyDelete
  25. UnknownNovember 2, 2015 at 11:13 AM

    CAN SOME OF U GUYS SEND ME THE DAT FILE ...?
    kishor.ananth@gmail.com

    ReplyDelete
  26. UnknownNovember 2, 2015 at 11:14 AM

    CAN SOME OF U GUYS SEND ME THE DAT FILE ...?
    kishor.ananth@gmail.com

    ReplyDelete
  27. AdminDecember 20, 2015 at 6:02 AM

    This comment has been removed by the author.

    ReplyDelete
    Replies
    1. AdminDecember 20, 2015 at 6:38 AM

      I found the solution for this error message.. https://goo.gl/1Dk6ZM

      Delete
  28. Murlidhar ChauguleJanuary 30, 2016 at 10:03 PM

    Send me crack please. murli2308@gmail.com

    ReplyDelete
  29. UnknownMarch 9, 2016 at 10:11 AM

    me also same problem plz tell how to solve vijay.siva06@gmail.com

    ReplyDelete
  30. UnknownApril 18, 2016 at 1:10 AM

    i'm having the same problem after installation please can you suggest me to solve this issue on my mail id rauttushar26@gmail.com

    ReplyDelete
  31. pagalJune 27, 2016 at 12:01 AM

    can u help me me too facing these error problme . pagalspark@gmail.com

    ReplyDelete
  32. UnknownJanuary 27, 2017 at 5:05 AM

    Bro can you please send me that file
    My email id is aravindforhappy@gmail.com

    ReplyDelete
    Replies
    1. UnknownJune 3, 2020 at 2:20 AM

      please send me that file if you have
      email: dhameliyaav@gmail.com

      Delete
  33. UnknownFebruary 14, 2018 at 6:27 AM

    i have same problem what can i do my id is pro9873@gmail.com

    ReplyDelete
  34. UnknownMay 7, 2020 at 12:27 AM

    how to get the crack file for cero 2.0

    ReplyDelete
  35. UnknownJuly 12, 2020 at 5:56 AM

    Please send me the crack file2

    ReplyDelete
  36. AnonymousApril 17, 2022 at 1:47 AM

    My Project Status: Does Your Cracked Pro E Gives License Error Message When Opened..? >>>>> Download Now

    >>>>> Download Full

    My Project Status: Does Your Cracked Pro E Gives License Error Message When Opened..? >>>>> Download LINK

    >>>>> Download Now

    My Project Status: Does Your Cracked Pro E Gives License Error Message When Opened..? >>>>> Download Full

    >>>>> Download LINK p3

    ReplyDelete

Subscribe to: Post Comments (Atom)